E30 Rear Shock Mount Reinforcements – Track style
These rear shock mount reinforcements are designed to make the track day racer or enthusiasts life a whole lot easier.
By having the mounting bolts welded to the reinforcing plate, they turn the shock into a bottom mount design, make removing your shocks dead easy.
No need to dismantle your boot trim, just undo the two nuts that are now in the wheel well, and the one lower shock bolt and your shock is out!
The reason for fitting these plates is the sheet metal supporting the rear shock mounts in an E30 are a known weak point.
Flexing from the suspensions articulation and hits from rough roads can fatigue the metal over the years can cause them to crack, weaken and fail.
Fitting stiffer shocks to an E30 can accelerate this problem.
Our steel rear shock mount reinforcements fit to the top of the strut tower spread the load over a much larger area than the E30 ever had.
No need to pull your boot trim apart, the dampers can now be unbolted from the wheel arch!
Simply press the factory studs out of your shock mounts and fit these plates in their place.
Comes with 4 new flanged locknuts.
Recommended for all BMW E30’s, a must for tracked cars and hoons.
Made from 3mm steel right here in Brisbane
Zinc plated so they don’t rust.
Fits all E30 including M3
These come as a pair (quantity 1 means we ship you 2)
44 in stock